Docs Menu
Docs Home
/
MongoDB Manual
/
Reference
/
Database Commands
/
Replication

replSetGetStatus

On this page

  • Definition
  • Compatibility
  • Syntax
  • Example
  • Output

Definition

replSetGetStatus

The replSetGetStatus command returns the status of the replica set from the point of view of the server that processed the command. replSetGetStatus must be run on the admin database.

The mongod instance must be a replica set member for replSetGetStatus to return successfully.

Data provided by this command derives from data included in heartbeats sent to the server by other members of the replica set. Because of the frequency of heartbeats, these data can be several seconds out of date.

Tip

In mongosh, this command can also be run through the rs.status() helper method.

Helper methods are convenient for mongosh users, but they may not return the same level of information as database commands. In cases where the convenience is not needed or the additional return fields are required, use the database command.

Compatibility

This command is available in deployments hosted in the following environments:

  • MongoDB Atlas: The fully managed service for MongoDB deployments in the cloud

Important

This command is not supported in M0, M2, and M5 clusters. For more information, see Unsupported Commands.

Syntax

The command has the following syntax:

db.adminCommand(
   {
     replSetGetStatus: 1
   }
)

If you run replSetGetStatus or the mongosh helper rs.status() on a member during its initial sync (i.e. STARTUP2 state), the command returns replSetGetStatus.initialSyncStatus metrics.

After the member completes the initial synchronization and transitions to another state, the replSetGetStatus.initialSyncStatus metrics are no longer available.

Example

The following example runs the replSetGetStatus command on the admin database of the replica set primary:

db.adminCommand( { replSetGetStatus: 1 } )

The command returns the following output for an example replica set primary:

{
   "set" : "replset",
   "date" : ISODate("2024-08-15T23:06:13.978Z"),
   "myState" : 1,
   "term" : NumberLong(3),
   "syncSourceHost" : "",
   "syncSourceId" : -1,
   "heartbeatIntervalMillis" : NumberLong(2000),
   "majorityVoteCount" : 2,
   "writeMajorityCount" : 2,
   "votingMembersCount" : 3,
   "writableVotingMembersCount" : 3,
   "optimes" : {
      "lastCommittedOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "lastCommittedWallTime" : ISODate("2024-08-15T23:06:13.978Z"),
      "readConcernMajorityOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "readConcernMajorityWallTime" : ISODate("2024-08-15T23:06:13.978Z"),
      "appliedOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "durableOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "lastAppliedWallTime" : ISODate("2020-03-05T05:24:38.122Z"),
      "lastDurableWallTime" : ISODate("2020-03-05T05:24:38.122Z")
   },
   "lastStableRecoveryTimestamp" : Timestamp(1723763173, 1),
   "electionCandidateMetrics" : {
      "lastElectionReason" : "stepUpRequestSkipDryRun",
      "lastElectionDate" : ISODate("2024-08-15T23:06:13.978Z"),
      "electionTerm" : NumberLong(3),
      "lastCommittedOpTimeAtElection" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(2)
      },
      "lastSeenOpTimeAtElection" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(2)
      },
      "numVotesNeeded" : 2,
      "priorityAtElection" : 1,
      "electionTimeoutMillis" : NumberLong(10000),
      "priorPrimaryMemberId" : 1,
      "numCatchUpOps" : NumberLong(0),
      "newTermStartDate" : ISODate("2024-08-15T23:06:13.978Z"),
      "wMajorityWriteAvailabilityDate" : ISODate("2024-08-15T23:06:13.978Z")
   },
   "electionParticipantMetrics" : {
      "votedForCandidate" : true,
      "electionTerm" : NumberLong(2),
      "lastVoteDate" : ISODate("2024-08-15T23:06:13.978Z"),
      "electionCandidateMemberId" : 1,
      "voteReason" : "",
      "lastAppliedOpTimeAtElection" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(1)
      },
      "maxAppliedOpTimeInSet" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(1)
      },
      "priorityAtElection" : 1
   },
   "members" : [
      {
         "_id" : 0,
         "name" : "m1.example.net:27017",
         "health" : 1,
         "state" : 1,
         "stateStr" : "PRIMARY",
         "uptime" : 269,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
        "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "optimeWrittenDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "syncSourceHost" : "",
         "syncSourceId" : -1,
         "infoMessage" : "",
         "electionTime" : Timestamp(1723763173, 1),
         "electionDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "configVersion" : 1,
         "configTerm" : 0,
         "self" : true,
         "lastHeartbeatMessage" : ""
      },
      {
         "_id" : 1,
         "name" : "m2.example.net:27017",
         "health" : 1,
         "state" : 2,
         "stateStr" : "SECONDARY",
         "uptime" : 266,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "optimeDurableDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeat" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeatRecv" : ISODate("2024-08-15T23:06:13.978Z"),
         "pingMs" : NumberLong(0),
         "lastHeartbeatMessage" : "",
         "syncSourceHost" : "m3.example.net:27017",
         "syncSourceId" : 2,
         "infoMessage" : "",
         "configVersion" : 1
      },
      {
         "_id" : 2,
         "name" : "m3.example.net:27017",
         "health" : 1,
         "state" : 2,
         "stateStr" : "SECONDARY",
         "uptime" : 266,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "optimeDurableDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeat" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeatRecv" : ISODate("2024-08-15T23:06:13.978Z"),
         "pingMs" : NumberLong(0),
         "lastHeartbeatMessage" : "",
         "syncSourceHost" : "m1.example.net:27017",
         "syncSourceId" : 0,
         "infoMessage" : "",
         "configVersion" : 1
      }
   ],
   "ok" : 1,
   "$clusterTime" : {
      "clusterTime" : Timestamp(1723763173, 1),
      "signature" : {
         "hash" : BinData(0,"9C2qcGVkipEGJW3iF90qxb/gIwc="),
         "keyId" : NumberLong("6800589497806356482")
      }
   },
   "operationTime" : Timestamp(1723763173, 1)
}

The following example runs the replSetGetStatus command on the admin database of the replica set secondary:

db.adminCommand( { replSetGetStatus: 1 } )

The command returns the following output for an example replica set secondary:

{
   "set" : "replset",
   "date" : ISODate("2024-08-15T23:06:13.978Z"),
   "myState" : 2,
   "term" : NumberLong(3),
   "syncSourceHost" : "m3.example.net:27017",
   "syncSourceId" : 2,
   "heartbeatIntervalMillis" : NumberLong(2000),
   "majorityVoteCount" : 2,
   "writeMajorityCount" : 2,
   "votingMembersCount" : 3,
   "writableVotingMembersCount" : 3,
   "optimes" : {
      "lastCommittedOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "lastCommittedWallTime" : ISODate("2024-08-15T23:06:13.978Z"),
      "readConcernMajorityOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "readConcernMajorityWallTime" : ISODate("2024-08-15T23:06:13.978Z"),
      "appliedOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "durableOpTime" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(3)
      },
      "lastAppliedWallTime" : ISODate("2024-08-15T23:06:13.978Z"),
      "lastDurableWallTime" : ISODate("2024-08-15T23:06:13.978Z")
   },
   "lastStableRecoveryTimestamp" : Timestamp(1723763173, 1),
   "electionParticipantMetrics" : {
      "votedForCandidate" : true,
      "electionTerm" : NumberLong(3),
      "lastVoteDate" : ISODate("2024-08-15T23:06:13.978Z"),
      "electionCandidateMemberId" : 0,
      "voteReason" : "",
      "lastAppliedOpTimeAtElection" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(2)
      },
      "maxAppliedOpTimeInSet" : {
         "ts" : Timestamp(1723763173, 1),
         "t" : NumberLong(2)
      },
      "priorityAtElection" : 1,
      "newTermStartDate" : ISODate("2024-08-15T23:06:13.978Z"),
      "newTermAppliedDate" : ISODate("2024-08-15T23:06:13.978Z")
   },
   "members" : [
      {
         "_id" : 0,
         "name" : "m1.example.net:27017",
         "health" : 1,
         "state" : 1,
         "stateStr" : "PRIMARY",
         "uptime" : 407,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "optimeDurableDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeat" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeatRecv" : ISODate("2024-08-15T23:06:13.978Z"),
         "pingMs" : NumberLong(0),
         "lastHeartbeatMessage" : "",
         "syncSourceHost" : "",
         "syncSourceId" : -1,
         "infoMessage" : "",
         "electionTime" : Timestamp(1723763173, 1),
         "electionDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "configVersion" : 1
      },
      {
         "_id" : 1,
         "name" : "m2.example.net:27017",
         "health" : 1,
         "state" : 2,
         "stateStr" : "SECONDARY",
         "uptime" : 409,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "syncSourceHost" : "m3.example.net:27017",
         "syncSourceId" : 2,
         "infoMessage" : "",
         "configVersion" : 1,
         "configTerm" : 0,
         "self" : true,
         "lastHeartbeatMessage" : ""
      },
      {
         "_id" : 2,
         "name" : "m3.example.net:27017",
         "health" : 1,
         "state" : 2,
         "stateStr" : "SECONDARY",
         "uptime" : 407,
         "optime" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDurable" : {
            "ts" : Timestamp(1723763173, 1),
            "t" : NumberLong(3)
         },
         "optimeDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "optimeDurableDate" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastAppliedWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastDurableWallTime": ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeat" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeatRecv" : ISODate("2024-08-15T23:06:13.978Z"),
         "pingMs" : NumberLong(0),
         "lastHeartbeatMessage" : "",
         "syncSourceHost" : "m1.example.net:27017",
         "syncSourceId" : 0,
         "infoMessage" : "",
         "configVersion" : 1
      }
   ],
   "ok" : 1,
   "$clusterTime" : {
      "clusterTime" : Timestamp(1723763173, 1),
      "signature" : {
         "hash" : BinData(0,"kmhE5YARZlzn/DX4B/D0E5P6okY="),
         "keyId" : NumberLong("6800589497806356482")
      }
   },
   "operationTime" : Timestamp(1723763173, 1),
}
In earlier versions (3.6.x-4.2.0)

You can include the optional initialSync: 1 to include the replSetGetStatus.initialSyncStatus in the output (you can omit if you do not want to return the initial sync status):

db.adminCommand( { replSetGetStatus: 1, initialSync: 1 } )
Starting in MongoDB 5.2,
the replSetGetStatus.initialSyncStatus document contains additional fields when using a file copy based initial sync.

If you run replSetGetStatus on a member during its initial sync, the command returns replSetGetStatus.initialSyncStatus metrics.

db.adminCommand( { replSetGetStatus: 1 } )

After the member completes the initial synchronization and transitions to another state, the replSetGetStatus.initialSyncStatus metrics are no longer available.

The following example runs the replSetGetStatus command on the admin database of the 4.4 replica set member during its initial sync:

{
   "set" : "replset",
   "date" : ISODate("2024-08-15T23:06:13.978Z")
   "myState" : 5,
   "term" : NumberLong(1),
   "syncSourceHost" : "m1.example.net:27017",
   "syncSourceId" : 0,
   "heartbeatIntervalMillis" : NumberLong(2000),
   "majorityVoteCount" : 2,
   "writeMajorityCount" : 2,
   "votingMembersCount" : 2,
   "writableVotingMembersCount" : 2,
   "optimes" : {
      "lastCommittedOpTime" : {
         "ts" : Timestamp(0, 0),
         "t" : NumberLong(-1)
      },
      "lastCommittedWallTime" : ISODate("1970-01-01T00:00:00Z"),
      "appliedOpTime" : {
         "ts" : Timestamp(0, 0),
         "t" : NumberLong(-1)
      },
      "durableOpTime" : {
         "ts" : Timestamp(0, 0),
         "t" : NumberLong(-1)
      },
      "lastAppliedWallTime" : ISODate("1970-01-01T00:00:00Z"),
      "lastDurableWallTime" : ISODate("1970-01-01T00:00:00Z")
   },
   "lastStableRecoveryTimestamp" : Timestamp(0, 0),
   "initialSyncStatus" : {
      "failedInitialSyncAttempts" : 0,
      "maxFailedInitialSyncAttempts" : 10,
      "initialSyncStart" : ISODate("2024-08-15T23:06:13.978Z"),
      "initialSyncAttempts" : [ ],
      "appliedOps" : 0,
      "initialSyncOplogStart" : Timestamp(1723763173, 1),
      "syncSourceUnreachableSince" : ISODate("2024-08-15T23:06:13.978Z"),
      "currentOutageDurationMillis" : NumberLong(8687),
      "totalTimeUnreachableMillis" : NumberLong(8687),
      "databases" : {
         "databasesCloned" : 3,
         "admin" : {
            "collections" : 4,
            "clonedCollections" : 4,
            "start" : ISODate("2024-08-15T23:06:13.978Z"),
            "end" : ISODate("2024-08-15T23:06:13.978Z"),
            "elapsedMillis" : 429,
            "admin.system.roles" : {
               "documentsToCopy" : 22,
               "documentsCopied" : 22,
               "indexes" : 2,
               "fetchedBatches" : 1,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 138,
               "receivedBatches" : 1
            },
            "admin.system.users" : {
               "documentsToCopy" : 32,
               "documentsCopied" : 32,
               "indexes" : 2,
               "fetchedBatches" : 1,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 149,
               "receivedBatches" : 1
            },
            "admin.system.keys" : {
               "documentsToCopy" : 2,
               "documentsCopied" : 2,
               "indexes" : 1,
               "fetchedBatches" : 1,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 76,
               "receivedBatches" : 1
            },
            "admin.system.version" : {
               "documentsToCopy" : 2,
               "documentsCopied" : 2,
               "indexes" : 1,
               "fetchedBatches" : 1,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 66,
               "receivedBatches" : 1
            }
         },
         "config" : {
            "collections" : 2,
            "clonedCollections" : 2,
            "start" : ISODate("2024-08-15T23:06:13.978Z"),
            "end" : ISODate("2024-08-15T23:06:13.978Z"),
            "elapsedMillis" : 198,
            "config.transactions" : {
               "documentsToCopy" : 0,
               "documentsCopied" : 0,
               "indexes" : 1,
               "fetchedBatches" : 0,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 74,
               "receivedBatches" : 0
            },
            "config.system.sessions" : {
               "documentsToCopy" : 0,
               "documentsCopied" : 0,
               "indexes" : 2,
               "fetchedBatches" : 0,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 124,
               "receivedBatches" : 0
            }
         },
         "test" : {
            "collections" : 1,
            "clonedCollections" : 1,
            "start" : ISODate("2024-08-15T23:06:13.978Z"),
            "end" : ISODate("2024-08-15T23:06:13.978Z"),
            "elapsedMillis" : 47967,
            "test.hugeindex" : {
               "documentsToCopy" : 25000,
               "documentsCopied" : 25000,
               "indexes" : 2,
               "fetchedBatches" : 21,
               "start" : ISODate("2024-08-15T23:06:13.978Z"),
               "end" : ISODate("2024-08-15T23:06:13.978Z"),
               "elapsedMillis" : 47967,
               "receivedBatches" : 21
            }
         }
      }
   },
   "members" : [
      {
         "_id" : 0,
         "name" : "m1.example.net:27017",
         "health" : 0,
         "state" : 8,
         "stateStr" : "(not reachable/healthy)",
         "uptime" : 0,
         "optime" : {
            "ts" : Timestamp(0, 0),
            "t" : NumberLong(-1)
         },
         "optimeDurable" : {
            "ts" : Timestamp(0, 0),
            "t" : NumberLong(-1)
         },
         "optimeDate" : ISODate("1970-01-01T00:00:00Z"),
         "optimeDurableDate" : ISODate("1970-01-01T00:00:00Z"),
         "lastAppliedWallTime": ISODate("1970-01-01T00:00:00Z"),
         "lastDurableWallTime": ISODate("1970-01-01T00:00:00Z""),
         "lastHeartbeat" : ISODate("2024-08-15T23:06:13.978Z"),
         "lastHeartbeatRecv" : ISODate("2024-08-15T23:06:13.978Z"),
         "pingMs" : NumberLong(0),
         "lastHeartbeatMessage" : "Error connecting to m1.example.net:27017 (127.0.0.1:27018) :: caused by :: Connection refused",
         "syncSourceHost" : "",
         "syncSourceId" : -1,
         "infoMessage" : "",
         "configVersion" : 2
      },
      {
         "_id" : 1,
         "name" : "m2.example.net:27017",
         "health" : 1,
         "state" : 5,
         "stateStr" : "STARTUP2",
         "uptime" : 5297,
         "optime" : {
            "ts" : Timestamp(0, 0),
            "t" : NumberLong(-1)
         },
         "optimeDurable" : {
            "ts" : Timestamp(0, 0),
            "t" : NumberLong(-1)
         },
         "optimeDate" : ISODate("1970-01-01T00:00:00Z"),
         "lastAppliedWallTime": ISODate("1970-01-01T00:00:00Z"),
         "lastDurableWallTime": ISODate("1970-01-01T00:00:00Z"),
         "syncSourceHost" : "m1.example.net:27017",
         "syncSourceId" : 0,
         "infoMessage" : "",
         "configVersion" : 2,
         "configTerm" : 1,
         "self" : true,
         "lastHeartbeatMessage" : ""
      }
   ],
   "ok" : 1
}

Output

The replSetGetStatus command returns a document with the following fields:

replSetGetStatus.set

The set value is the name of the replica set, configured in the replSetName setting. This is the same value as _id in rs.conf().

replSetGetStatus.date

An ISODate formatted date and time that contains the current time according to the server that processed the replSetGetStatus command. Compare this to the values of replSetGetStatus.members[n].lastHeartbeat to find the operational latency between this server and the other members of the replica set.

replSetGetStatus.myState

An integer between 0 and 10 that represents the replica state of the current member.

replSetGetStatus.term

The election count for the replica set, as known to this replica set member. The term is used by the distributed consensus algorithm to ensure correctness.

replSetGetStatus.syncSourceHost

The syncSourceHost field holds the hostname of the member from which this instance syncs.

If this instance is a primary, syncSourceHost is an empty string and the syncSourceId -1.

replSetGetStatus.syncSourceId

The syncSourceId field holds the replSetGetStatus.members[n]._id of the member from which this instance synchronizes.

If this instance is a primary, syncSourceHost is an empty string and the syncSourceId -1.

replSetGetStatus.heartbeatIntervalMillis

The frequency in milliseconds of the heartbeats.

replSetGetStatus.majorityVoteCount

The number of majority votes needed to elect a new primary in an election.

replSetGetStatus.writeMajorityCount

The number of data-bearing voting members (i.e. not arbiters) needed to fulfill write concern "majority". Writes can only be applied to data-bearing members.

For the calculation of replSetGetStatus.writeMajorityCount, see Calculating Majority for Write Concern.

replSetGetStatus.votingMembersCount

The number of members configured with votes: 1, including arbiters.

replSetGetStatus.writableVotingMembersCount

The number of data-bearing members configured with votes: 1 (this does not include arbiters).

replSetGetStatus.optimes

The optimes field holds a document that contains optimes used to inspect replication progress. The optimes field includes the corresponding ISODate-formatted date strings for the various optimes.

Each optime value is a document that contains:

  • ts, the Timestamp of the operation.

  • t, the term in which the operation was originally generated on the primary.

replSetGetStatus.optimes.lastCommittedOpTime

Information, from the viewpoint of this member, regarding the most recent operation that has been written to a majority of replica set members.

replSetGetStatus.optimes.lastCommittedWallTime

The ISODate-formatted date string corresponding to lastCommittedOpTime.

replSetGetStatus.optimes.readConcernMajorityOpTime

Information, from the viewpoint of this member, regarding the most recent operation that can fulfill read concern "majority" queries; i.e. the most recent lastCommittedOpTime that can fulfill "majority" queries. readConcernMajorityOpTime is either less than or equal to lastCommittedOpTime.

replSetGetStatus.optimes.readConcernMajorityWallTime

The ISODate-formatted date string corresponding to readConcernMajorityOpTime.

replSetGetStatus.optimes.appliedOpTime

Information, from the viewpoint of this member, regarding the most recent operation that has been applied to this member of the replica set.

replSetGetStatus.optimes.lastAppliedWallTime

The ISODate-formatted date string corresponding to appliedOpTime.

replSetGetStatus.optimes.durableOpTime

Information, from the viewpoint of this member, regarding the most recent operation that has been written to the journal of this member of the replica set.

replSetGetStatus.optimes.lastDurableWallTime

The ISODate-formatted date string corresponding to durableOpTime.

replSetGetStatus.lastStableRecoveryTimestamp

For internal use only

replSetGetStatus.electionCandidateMetrics

Metrics related to the election of the current primary. electionCandidateMetrics is only available on the primary or a candidate for election. For a candidate, the metrics are unavailable after the candidate loses the election.

replSetGetStatus.electionCandidateMetrics.lastElectionReason

Reason the member called the election.

replSetGetStatus.electionCandidateMetrics.lastElectionDate

The date and time the member called the election.

replSetGetStatus.electionCandidateMetrics.electionTerm

The member's election count (i.e. term) at the time it called the new election.

replSetGetStatus.electionCandidateMetrics.lastCommittedOpTimeAtElection

The most recent majority-committed optime, as seen by this member, at the time it called the new election.

replSetGetStatus.electionCandidateMetrics.lastSeenOpTimeAtElection

The member's most recent applied optime at the time it called the new election.

replSetGetStatus.electionCandidateMetrics.numVotesNeeded

The number of votes needed to win the election.

replSetGetStatus.electionCandidateMetrics.priorityAtElection

The member's priority at the time it called the election.

replSetGetStatus.electionCandidateMetrics.electionTimeoutMillis

The replica set's configured electionTimeoutMillis setting at the time of the election.

replSetGetStatus.electionCandidateMetrics.priorPrimaryMemberId

The members[n]._id of the previous primary. If there is no previous primary, then the field is not present.

replSetGetStatus.electionCandidateMetrics.targetCatchupOpTime

The newly-elected primary's target opTime for its catchup process. Only when the newly-elected primary reaches the target catchup opTime can it start accepting writes.

replSetGetStatus.electionCandidateMetrics.numCatchUpOps

The number of operations applied by the newly-elected primary as it successfully concludes its catchup process.

replSetGetStatus.electionCandidateMetrics.newTermStartDate

The date and time at which the member's term as the primary started (i.e. the date and time at which a new term entry was written to the oplog).

replSetGetStatus.electionCandidateMetrics.wMajorityWriteAvailabilityDate

The date and time at which the write concern "majority" became available after the election for the replica set (the date and time when the new term oplog entry was majority committed).

replSetGetStatus.electionParticipantMetrics

Metrics related to the latest election in which the member participated.

replSetGetStatus.electionParticipantMetrics.votedForCandidate

A boolean which indicates whether the member voted for the candidate calling the election.

replSetGetStatus.electionParticipantMetrics.electionTerm

The term of the election in which the member participated. The term identifies the election associated with the participant metrics.

replSetGetStatus.electionParticipantMetrics.lastVoteDate

An ISODate formatted date string that records when the participant voted.

replSetGetStatus.electionParticipantMetrics.electionCandidateMemberId

The members[n]._id of the candidate calling the election.

replSetGetStatus.electionParticipantMetrics.voteReason

The reason for the vote if the member did not vote for the candidate. If the member voted for the candidate, the value is an empty string.

replSetGetStatus.electionParticipantMetrics.lastAppliedOpTimeAtElection

This member's latest applied optime at the time of the election.

The optime value is a document that contains the Timestamp (ts) and the term (t).

replSetGetStatus.electionParticipantMetrics.maxAppliedOpTimeInSet

The most recent applied optime for any member of this replica set, as known by this member.

The optime value is a document that contains the Timestamp (ts) and the term (t).

replSetGetStatus.electionParticipantMetrics.priorityAtElection

The member's priority at the time of the election.

replSetGetStatus.electionParticipantMetrics.newTermStartDate

The date and time at which the elected primary's term started; this corresponds to when the primary wrote the new term entry to its oplog and not when the entry was added (i.e. replicated) to the secondary's oplog.

The field is available for secondary members only. For the primary, see replSetGetStatus.electionCandidateMetrics.newTermStartDate instead.

replSetGetStatus.electionParticipantMetrics.newTermAppliedDate

The date and time at which this secondary applied the new term entry.

The field is available for secondary members only.

replSetGetStatus.initialSyncStatus

A document that provides information on the progress and status of initial sync on this member.

Important

Availability

replSetGetStatus.initialSyncStatus metrics are only available when run on a member during its initial sync (i.e. STARTUP2 state).

replSetGetStatus.initialSyncStatus.failedInitialSyncAttempts

The number of times the initial sync failed and had to restart on this member.

replSetGetStatus.initialSyncStatus.maxFailedInitialSyncAttempts

The maximum number of times the initial sync can restart on this member before the member shuts down.

replSetGetStatus.initialSyncStatus.initialSyncStart

The start timestamp of the initial sync for this member.

replSetGetStatus.initialSyncStatus.initialSyncEnd

The end timestamp of the initial sync for this member.

replSetGetStatus.initialSyncStatus.initialSyncElapsedMillis

The number of milliseconds between initialSyncStart and initialSyncEnd.

replSetGetStatus.initialSyncStatus.initialSyncAttempts

Array of documents where each document corresponds to a single initial sync attempt. For example:

"initialSyncAttempts" : [
   {
      "durationMillis" : 59539,
      "status" : "InvalidOptions: error fetching oplog during initial sync :: caused by :: Error while getting the next batch in the oplog fetcher :: caused by :: readConcern afterClusterTime value must not be greater than the current clusterTime. Requested clusterTime: { ts: Timestamp(0, 1) }; current clusterTime: { ts: Timestamp(0, 0) }",
      "syncSource" : "m1.example.net:27017",
      "rollBackId" : 1,
      "operationsRetried" : 120,
      "totalTimeUnreachableMillis" : 52601
   }
],

Each document contains the following information for the initial sync attempt:

Field
Description
durationMillis
Duration in milliseconds of the initial sync attempt.
status
Exit status of the initial sync attempt.
syncSource
Sync source for the initial sync attempt.
rollBackId

The sync source's rollback identifier at the start of the initial sync attempt.

rollBackId does not appear when using file copy based initial sync.

operationsRetried
Total number of all operation retry attempts.
totalTimeUnreachableMillis
Total time spent for retry operation attempts.

See also failedInitialSyncAttempts.

replSetGetStatus.initialSyncStatus.appliedOps

The number of ops that occurred after the initial sync started and were applied after cloning the databases.

As part of the initial sync process, the member uses the oplog to update its data set to reflect the current state of the replica set.

replSetGetStatus.initialSyncStatus.initialSyncOplogStart

The start timestamp of the oplog application stage of the initial sync where the member applies changes that occurred after the initial sync start.

As part of the initial sync process, the member uses the oplog to update its data set to reflect the current state of the replica set.

replSetGetStatus.initialSyncStatus.initialSyncOplogEnd

The end timestamp of the oplog application stage of the initial sync where the member applies changes that occurred after the initial sync start.

As part of the initial sync process, the member uses the oplog to update its data set to reflect the current state of the replica set.

replSetGetStatus.initialSyncStatus.syncSourceUnreachableSince

The date and time at which the sync source became unreachable.

Only present if the if sync source is unavailable during the current initial sync.

replSetGetStatus.initialSyncStatus.currentOutageDurationMillis

The time in milliseconds that the sync source has been unavailable.

Only present if the if sync source is unavailable during the current initial sync.

replSetGetStatus.initialSyncStatus.totalTimeUnreachableMillis

The total time in milliseconds that the member has been unavailable during the current initial sync.

replSetGetStatus.initialSyncStatus.databases

Detail on the databases cloned during initial sync.

replSetGetStatus.initialSyncStatus.databases.databasesCloned

Number of databases cloned during initial sync.

replSetGetStatus.initialSyncStatus.databases.<dbname>

For each database, a document that returns information regarding the progress of the cloning of that database.

{
   "collections" : <number of collections to clone in the database>,
   "clonedCollections" : <number of collections cloned to date>,
   "start" : <start date and time for the database clone>,
   "end" : <end date and time for the database clone>,
   "elapsedMillis" : <duration of the database clone>,
   "<db>.<collection>" : {
      "documentsToCopy" : <number of documents to copy>,
      "documentsCopied" : <number of documents copied to date>,
      "indexes" :  <number of indexes>,
      "fetchedBatches" :  <number of batches of documents fetched to date>,
      "start" :  <start date and time for the collection clone>,
      "end" : <end date and time for the collection clone>,
      "elapsedMillis" : <duration of the collection clone>,
      "receivedBatches" : <number of batches of documents received to date>
   }
}
replSetGetStatus.initialSyncStatus.method

New in version 5.2.

The method used for the initial sync.

If set to logical, the sync is a logical initial sync. If set to fileCopyBased, the sync is a file copy based initial sync.

replSetGetStatus.initialSyncStatus.approxTotalDataSize

The approximate size (in bytes) of all files to be synced.

This field appears when using either logical or file copy based initial sync.

replSetGetStatus.initialSyncStatus.approxTotalBytesCopied

The total bytes already copied.

This field appears when using either logical or file copy based initial sync.

replSetGetStatus.initialSyncStatus.totalInitialSyncElapsedMillis

The total time elapsed for the sync attempt in progress.

This field appears when using either logical or file copy based initial sync.

replSetGetStatus.initialSyncStatus.remainingInitialSyncEstimatedMillis

The expected time remaining for the sync attempt in progress.

This field appears when using either logical or file copy based initial sync.

replSetGetStatus.initialSyncStatus.initialBackupDataSize

The total size (in bytes) of the initial set of files to be synced.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.previousOplogEnd

The optime available in the previous backup cursor.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.currentOplogEnd

The last optime guaranteed to be available in the current backup cursor.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.syncSourceLastApplied

The optime of the last update applied at the sync source prior to the start of this backup cursor.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.numExtensions

The number of times the sync has started a new backup cursor.

This field does not appear if a backup cursor has not started.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.extensionDataSize

The total bytes in the current extension.

This field does not appear if there is no extension in progress.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.files

An array of files to be synced during file copy based initial sync.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.files[n].filePath

The path of the file relative to the root of the backup cursor.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.files[n].fileSize

The size of the file as reported by the backup cursor.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.files[n].bytesCopied

The number of bytes copied so far.

This field only appears when using file copy based initial sync.

replSetGetStatus.initialSyncStatus.files[n].extensionNumber

The number of the extension the file belongs to if this file is part of an extension.

This field only appears when using file copy based initial sync.

replSetGetStatus.members

The members field holds an array that contains a document for every member in the replica set.

replSetGetStatus.members[n]._id

The identifier for the member.

replSetGetStatus.members[n].name

The name of the member.

replSetGetStatus.members[n].ip

The resolved IP address of the member. If the mongod is unable to resolve the replSetGetStatus.members[n].name to an IP address, the return value is a BSON null. Otherwise, the returned value is a string representation of the resolved IP address.

replSetGetStatus.members[n].self

A boolean that indicates if the member is the current mongod instance.

The self field is only included in the document for the current mongod instance, and as such, its value is always true.

replSetGetStatus.members[n].health

A number that indicates if the member is up (1) or down (0).

replSetGetStatus.members[n].state

An integer between 0 and 10 that represents the replica state of the member.

replSetGetStatus.members[n].stateStr

A string that describes state.

replSetGetStatus.members[n].uptime

For the member on which the replSetGetStatus command is run, uptime is the the number of seconds the member has been online.

For the other members, uptime is the number of seconds the member has been in continuous communication with the member on which the replSetGetStatus command was run.

replSetGetStatus.members[n].optime

Information regarding the last operation from the operation log that this member has applied.

optime returns a document that contains:

  • ts, the Timestamp of the last operation applied to this member of the replica set from the oplog.

  • t, the term in which the last applied operation was originally generated on the primary.

replSetGetStatus.members[n].optimeDurable

Information regarding the last operation from the operation log that this member has applied to its journal.

optimeDurable returns a document that contains:

  • ts, the Timestamp of the operation.

  • t, the term in which this operation was originally generated on the primary.

replSetGetStatus.members[n].optimeDate

An ISODate formatted date string that contains the last entry from the oplog that this member applied. If this differs significantly from lastHeartbeat this member is either experiencing "replication lag" or there have not been any new operations after the last update. Compare members.optimeDate between all of the members of the set.

replSetGetStatus.members[n].optimeDurableDate

An ISODate formatted date string that contains the last entry from the oplog that this member applied to its journal.

replSetGetStatus.members[n].lastAppliedWallTime

An ISODate formatted date string reflecting the wall clock time at which the last operation applied by this member of the replica set was applied on the primary node.

replSetGetStatus.members[n].lastDurableWallTime

An ISODate formatted date string reflecting the wall clock time at which the last operation written to this member's journal was first applied on the primary node.

replSetGetStatus.members[n].electionTime

For the current primary, information regarding the election Timestamp from the operation log. See Replica Set High Availability for more information about elections.

replSetGetStatus.members[n].electionDate

For the current primary, an ISODate formatted date string that contains the election date. See Replica Set High Availability for more information about elections.

replSetGetStatus.members[n].lastHeartbeat

An ISODate formatted date and time that contains the last time the server that processed the replSetGetStatus command received a response from a heartbeat that it sent to this member (members[n]). Compare this value to the values of the date and lastHeartbeatRecv fields to track latency between these replica set members.

This value is only available for replica set members other than the server specified by replSetGetStatus.members[n].self.

replSetGetStatus.members[n].lastHeartbeatRecv

An ISODate formatted date and time that contains the last time the server that processed the replSetGetStatus command received a heartbeat request from this member (members[n]). Compare this value to the values of the date and lastHeartbeat fields to track latency between these replica set members.

This value is only available for replica set members other than the server specified by replSetGetStatus.members[n].self.

replSetGetStatus.members[n].lastHeartbeatMessage

When the last heartbeat included an extra message, the lastHeartbeatMessage contains a string representation of that message.

replSetGetStatus.members[n].pingMs

The pingMs represents the number of milliseconds (ms) that a round-trip packet takes to travel between the remote member and the local instance.

This value does not appear for the member that returns the rs.status() data.

replSetGetStatus.members[n].syncSourceHost

The syncSourceHost field holds the hostname of the member from which this instance syncs.

If the replSetGetStatus.members[n] is a primary, syncSourceHost is an empty string and the syncSourceId -1.

replSetGetStatus.members[n].syncSourceId

The syncSourceId field holds the replSetGetStatus.members[n]._id value of the syncSourceHost.

If the replSetGetStatus.members[n] is a primary, syncSourceHost is an empty string and the syncSourceId -1.

replSetGetStatus.members[n].configVersion

The configVersion value is the replica set configuration version.

replSetGetStatus.tooStale

A boolean which indicates that a replica set member has fallen too far behind the primary's oplog and is stuck in the RECOVERING state. This field is only included in the replSetGetStatus output if its value is true.

See also Response for details on the ok status field, the operationTime field and the $clusterTime field.

replSetGetStatus.optime

Present after the removal of a member from the replica set. Provides the optime of the last oplog entry applied by the removed member.

replSetGetStatus.optimeDate

Present after the removal of a member from the replica set. Provides the ISODate formatted string of the optime of the last oplog entry applied by the removed member.

Back

replSetGetConfig

Next

replSetInitiate